Archive for lowbrow

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow_Customs_Mid_Tunnel_P_Nut_Gas_Tank_peanut_wassell_bobber_chopper_Triumph_01_kso Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
P-Nut Mid-Tunnel Gas Tank 1.8 gallon. Nothing changes the look of your hand-built custom motorcycle like a new bobber gas tank. The Lowbrow P-Nut Gas Tank is a tidy, 1.8-gallon chopper gas tank based on the old Wassell peanut gas tanks available for custom bikes in the 1950’s – 70’s. In addition, the heavy gauge (1mm, approximately 19 gauge) steel used on the P-Nut Tank is much thicker, and the fabrication much higher quality, than the originals. The Mid-Tunnel P-Nut Tank has a tunnel that runs about midway through the gas tank, bringing your gas tank higher off the backbone than the Original (deep tunnel) version. Mid-Tunnel, tunnel runs midway through the gas tank – Two 1/4 inch NPT petcock bungs – Filler accepts a Harley-Davidson style thread-in gas cap (not included). The P-Nut Tank is intended for use on custom motorcycles, be it a bobber, chopper, cafe racer, vintage motorcycle or fresh off the showroom floor. This gas tank features two 1/4 NPT petcock bungs and undrilled mounting tabs for custom installation, and will accept a Harley-Davidson style thread-in gas cap (not included). Most people drill holes in the backbone of their frame, weld some blind threaded tophat bungs in place, and bolt the tank down using some leather washers to cushion between the gas tank tabs and the frame. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph” is in sale since Sunday, October 13, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.
  • Brand: LowBrow Customs
  • Fit: Universal Chopper Fit
  • Manufacturer Part Number: 005628
  • Material: Steel

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow_Customs_Frisco_P_Nut_Gas_Tank_peanut_wassell_bobber_chopper_Triumph_01_yj Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph
P-Nut Frisco Shallow Tunnel Gas Tank 2 gallon. Nothing changes the look of your hand-built custom motorcycle like a new bobber gas tank. The Lowbrow P-Nut Gas Tank is a tidy, 2-gallon chopper gas tank based on the old Wassell peanut gas tanks available for custom bikes in the 1950’s – 70’s. In addition, the heavy gauge (1mm, approximately 19 gauge) steel used on the P-Nut Tank is much thicker, and the fabrication much higher quality, than the originals. The Frisco P-Nut Tank has a shallow tunnel, raising your gas tank higher up as it sits on the backbone of your frame. Frisco mount, shallow tunnel so the gas tank sits up high – Two 1/4 inch NPT petcock bungs – Filler accepts a Harley-Davidson style thread-in gas cap (not included). The P-Nut Tank is intended for use on custom motorcycles, be it a bobber, chopper, cafe racer, vintage motorcycle or fresh off the showroom floor. This gas tank features two 1/4 NPT petcock bungs and undrilled mounting tabs for custom installation, and will accept a Harley-Davidson style thread-in gas cap (not included). Most people drill holes in the backbone of their frame, weld some blind threaded tophat bungs in place, and bolt the tank down using some leather washers to cushion between the gas tank tabs and the frame. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph” is in sale since Thursday, May 12, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.
  • Brand: LowBrow Customs
  • Fit: Universal Chopper Fit
  • Manufacturer Part Number: 005629
  • Material: Steel

Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow_Customs_Mid_Tunnel_P_Nut_Gas_Tank_peanut_wassell_bobber_chopper_Triumph_01_pisn Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph
P-Nut Mid-Tunnel Gas Tank 1.8 gallon. Nothing changes the look of your hand-built custom motorcycle like a new bobber gas tank. The Lowbrow P-Nut Gas Tank is a tidy, 1.8-gallon chopper gas tank based on the old Wassell peanut gas tanks available for custom bikes in the 1950’s – 70’s. In addition, the heavy gauge (1mm, approximately 19 gauge) steel used on the P-Nut Tank is much thicker, and the fabrication much higher quality, than the originals. The Mid-Tunnel P-Nut Tank has a tunnel that runs about midway through the gas tank, bringing your gas tank higher off the backbone than the Original (deep tunnel) version. Mid-Tunnel, tunnel runs midway through the gas tank – Two 1/4 inch NPT petcock bungs – Filler accepts a Harley-Davidson style thread-in gas cap (not included). The P-Nut Tank is intended for use on custom motorcycles, be it a bobber, chopper, cafe racer, vintage motorcycle or fresh off the showroom floor. This gas tank features two 1/4 NPT petcock bungs and undrilled mounting tabs for custom installation, and will accept a Harley-Davidson style thread-in gas cap (not included). Most people drill holes in the backbone of their frame, weld some blind threaded tophat bungs in place, and bolt the tank down using some leather washers to cushion between the gas tank tabs and the frame. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph” is in sale since Thursday, May 12, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.
  • Brand: LowBrow Customs
  • Fit: Universal Chopper Fit
  • Manufacturer Part Number: 005628
  • Material: Steel

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper

Lowbrow_Customs_Original_P_Nut_Gas_Tank_peanut_wassell_Triumph_bobber_chopper_01_pcb Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper

Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper
Original P-Nut Deep Tunnel Gas Tank 1.8 gallon. Nothing changes the look of your hand-built custom motorcycle like a new bobber gas tank. The Lowbrow P-Nut Gas Tank is a tidy, 1.8-gallon chopper gas tank based on the old Wassell peanut gas tanks available for custom bikes in the 1950’s – 70’s. In addition, the heavy gauge (1mm, approximately 19 gauge) steel used on the P-Nut Tank is much thicker, and the fabrication much higher quality, than the originals. The Original P-Nut Tank has a deep tunnel, it sits low down on the backbone of your frame. Deep tunnel, sits low down on the backbone of your frame – Two 1/4 inch NPT petcock bungs for delivering fuel to your carburetors – Filler accepts a Triumph / British gas cap (not included). The P-Nut Tank is intended for use on custom motorcycles, be it a bobber, chopper, cafe racer, vintage motorcycle or fresh off the showroom floor. This gas tank features two 1/4 NPT petcock bungs and undrilled mounting tabs for custom installation, and will accept a Triumph or British-style gas cap (not included). Most people drill holes in the backbone of their frame, weld some blind threaded tophat bungs in place, and bolt the tank down using some leather washers to cushion between the gas tank tabs and the frame. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper” is in sale since Tuesday, June 27, 2017. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.
  • Fit: Universal Chopper Fit
  • Brand: Lowbrow Customs
  • Manufacturer Part Number: 001626
  • Capacity: 1.8gal.
  • Material: Steel
  • Paint: Unfinished
  • Surface Finish: Raw
  • Placement on Vehicle: Front
  • Country/Region of Manufacture: Taiwan

Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper

Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper

Lowbrow_Customs_Cole_Foster_Gas_Tank_07_up_Harley_Sportster_EFI_bobber_chopper_01_lofp Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper

Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper
Cole Foster Harley-Davidson Sportster Gas Tank 2007 & Up – 3.25 gallon. Known for his minimalist approach to design and style, Cole Foster designed this low-slung gas tank to add some class to your custom Sportster. It comes complete with a knurled aluminum, 1-5/16-12 tpi (threads per inch) vented gas cap, and uses your stock fuel pump and gas tank mounting hardware. This gas tank swap is an easy install for novice or experienced motorcycle builder alike. With a capacity of approximately 3.25 gallons you won’t be making gas stops every 60 miles either! This tank comes with a 1-5/16-12 thread filler cap. You can easily change up the style and look of your bike with a different filler cap. Please note that there are both vented and unvented caps, the Cole Foster Sportster Gas Tank needs a vented cap to work properly. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper” is in sale since Friday, August 12, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.
  • Brand: LowBrow Customs
  • Fit: Custom Fit
  • Manufacturer Part Number: 005591
  • Capacity: 3.2gal.
  • Material: Steel
  • Paint: Unfinished
  • Bundled Items: Fuel Cap
  • Placement on Vehicle: Front
  • Country/Region of Manufacture: Taiwan

Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper

Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber

Lowbrow_Customs_WX_Split_Gas_Tank_36_84_Harley_Panhead_Shovelhead_chopper_bobber_01_afo Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber

Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber
WX Split Gas Tanks – Bolt-On for 1936 – 1984 Big Twin Harley-Davidsons – 2.25 gallon. Get a custom, narrowed look with a tight gap between the tanks and no fabrication required. These are the perfect tanks for a custom Shovelhead or Panhead chopper, bobber or custom motorcycle. In 1946 Harley-Davidson introduced the WR factory racer, a 45 cubic-inch flathead designed to dominate the flat tracks and road courses in America. The narrowed tanks were part of the slim profile and’all-business’ form that follows function when it comes to a fast and nimble motorcycle. WX Gas Tanks have a capacity of 2.25 gallons for both tank sides combined (not 2.25 gallons for each side) and feature both a vent and fuel crossover and accept a stock-style 22mm H-D style petcock and accept standard cam-style Harley-Davidson gas cap. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber” is in sale since Monday, April 4, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.
  • Brand: LowBrow Customs
  • Fit: Universal Bobber Fit
  • Manufacturer Part Number: 004051
  • Material: Steel
  • Paint: Unfinished
  • Warranty: Yes

Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber

Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber

Lowbrow_Customs_Narrow_Sporty_Frisco_Gas_Tank_Harley_Sportster_chopper_bobber_01_ds Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber

Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber
Narrow Sporty Frisco Gas Tank 2.5 gallon. The Narrow Sporty Frisco Tank is the amalgamation of steel and chopper style with undertones of a MoCo heritage that’s Motor Company, or Harley-Davidson for you uninitiated! This custom gas tank holds approximately 2.5 gallons and will give your bike style for miles. It is based on a highly modified frisco-mount Sportster gas tank, perfect for custom bikes, bobbers and choppers. Featuring: -One-piece stamped 16-gauge steel top and bottom -TIG welded tank seams and mounting tabs -Lathe-turned, hand-brazed threaded steel cap bung -Vented, aluminum, 1-5/16-12 thread gas cap (included) -Hand-brazed fuel bung accepts Harley-Davidson style 22mm petcocks. This tank comes with a 1-5/16-12 thread filler cap. You can easily change up the style and look of your bike with a different filler cap. Please note that there are both vented and unvented caps, the Narrow Sporty Frisco Gas Tank needs a vented cap to work properly. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber” is in sale since Friday, November 27, 2015. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.
  • Fit: Universal Fit
  • Brand: Lowbrow Customs
  • Manufacturer Part Number: 003352
  • Capacity: 2.5gal.
  • Material: Steel
  • Paint: Unfinished
  • Surface Finish: Raw
  • Placement on Vehicle: Front
  • Country/Region of Manufacture: Taiwan

Lowbrow Customs Narrow Sporty Frisco Gas Tank Harley Sportster chopper bobber