customs | Tank Stainless Steel

Tag Archive for customs

Tall Koffin Coffin Gas Tank 3.4 Gallon for Harley Chopper Customs Motorcycle

Tall Koffin Coffin Gas Tank 3.4 Gallon for Harley Chopper Customs Motorcycle

New Gas Tank by V-Twin Mfg. Gas tank accepts a left side petcock with a 3/8 National Pipe Thread. Fuel capacity is 3.4 gallons. Tank features ISO mount strap system. NOTE:Includes 2 black brackets and bolts. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal to help stop leaks and prevent corrosion. Check petcock opening, making sure the petcock can be easily installed. The petcock fitting should be masked or plugged during painting for easy installation of the petcock. FITS Custom application Top Length: 25.5″ Bottom Length: 20″ Rear Width: 3″ Front Width: 12″ Rear Height: 2.5″ Front Height: 6″ Front Tunnel Height: 4″ Rear Tunnel Height: 1″ Tunnel Length: 24″ Tunnel Width: 2-1/4″ Mount Hole: 4.45 CTC. If you don’t see what you’re looking for, please send us a message! Many orders are received before the estimated date. Powered by SixBit’s eCommerce Solution. The item “Tall Koffin Coffin Gas Tank 3.4 Gallon for Harley Chopper Customs Motorcycle” is in sale since Monday, May 4, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “m40powersports” and is located in Lawton, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Russian federation.

Brand: V-Twin Manufacturing
Manufacturer Part Number: 38-0199
Color: Raw
Capacity: 3.4gal.
Material: Steel
Paint: N/A
Surface Finish: Raw

Tall Koffin Coffin Gas Tank 3.4 Gallon for Harley Chopper Customs Motorcycle

March 8, 2020 / admin / Comments Off

New Gas Tank by V-Twin Mfg. Gas tank accepts a left side petcock with a 3/8 National Pipe Thread. Fuel capacity is 3.4 gallons. Tank features ISO mount strap system. NOTE:Includes 2 black brackets and bolts. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal to help stop leaks and prevent corrosion. Check petcock opening, making sure the petcock can be easily installed. The petcock fitting should be masked or plugged during painting for easy installation of the petcock. FITS Custom application Top Length: 25.5″ Bottom Length: 20″ Rear Width: 3″ Front Width: 12″ Rear Height: 2.5″ Front Height: 6″ Front Tunnel Height: 4″ Rear Tunnel Height: 1″ Tunnel Length: 24″ Tunnel Width: 2-1/4″ Mount Hole: 4.45 CTC. If you don’t see what you’re looking for, please send us a message! Many orders are received before the estimated date. Powered by SixBit’s eCommerce Solution. The item “Tall Koffin Coffin Gas Tank 3.4 Gallon for Harley Chopper Customs Motorcycle” is in sale since Thursday, February 13, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “m40powersports” and is located in Lawton, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

Brand: V-Twin Manufacturing
Manufacturer Part Number: 38-0199
Capacity: 3.4gal.
Material: Steel
Paint: N/A
Color: Raw
Surface Finish: Raw

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

March 6, 2020 / admin / Comments Off

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

P-Nut Mid-Tunnel Gas Tank 1.8 gallon. Nothing changes the look of your hand-built custom motorcycle like a new bobber gas tank. The Lowbrow P-Nut Gas Tank is a tidy, 1.8-gallon chopper gas tank based on the old Wassell peanut gas tanks available for custom bikes in the 1950’s – 70’s. In addition, the heavy gauge (1mm, approximately 19 gauge) steel used on the P-Nut Tank is much thicker, and the fabrication much higher quality, than the originals. The Mid-Tunnel P-Nut Tank has a tunnel that runs about midway through the gas tank, bringing your gas tank higher off the backbone than the Original (deep tunnel) version. Mid-Tunnel, tunnel runs midway through the gas tank – Two 1/4 inch NPT petcock bungs – Filler accepts a Harley-Davidson style thread-in gas cap (not included). The P-Nut Tank is intended for use on custom motorcycles, be it a bobber, chopper, cafe racer, vintage motorcycle or fresh off the showroom floor. This gas tank features two 1/4 NPT petcock bungs and undrilled mounting tabs for custom installation, and will accept a Harley-Davidson style thread-in gas cap (not included). Most people drill holes in the backbone of their frame, weld some blind threaded tophat bungs in place, and bolt the tank down using some leather washers to cushion between the gas tank tabs and the frame. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph” is in sale since Sunday, October 13, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.

Brand: LowBrow Customs
Fit: Universal Chopper Fit
Manufacturer Part Number: 005628
Material: Steel

Tall Koffin Coffin Gas Tank 3.4 Gallon for Harley Chopper Customs Motorcycle

December 5, 2019 / admin / Comments Off

New Gas Tank by V-Twin Mfg. Gas tank accepts a left side petcock with a 3/8 National Pipe Thread. Fuel capacity is 3.4 gallons. Tank features ISO mount strap system. NOTE:Includes 2 black brackets and bolts. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal to help stop leaks and prevent corrosion. Check petcock opening, making sure the petcock can be easily installed. The petcock fitting should be masked or plugged during painting for easy installation of the petcock. FITS Custom application Top Length: 25.5″ Bottom Length: 20″ Rear Width: 3″ Front Width: 12″ Rear Height: 2.5″ Front Height: 6″ Front Tunnel Height: 4″ Rear Tunnel Height: 1″ Tunnel Length: 24″ Tunnel Width: 2-1/4″ Mount Hole: 4.45 CTC. If you don’t see what you’re looking for, please send us a message! Many orders are received before the estimated date. Powered by SixBit’s eCommerce Solution. The item “Tall Koffin Coffin Gas Tank 3.4 Gallon for Harley Chopper Customs Motorcycle” is in sale since Tuesday, November 5, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “m40powersports” and is located in Lawton, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

Brand: V-Twin Manufacturing
Manufacturer Part Number: 38-0199
Capacity: 3.4gal.
Material: Steel
Paint: N/A
Color: Raw
Surface Finish: Raw

Custom Frisco Mount Narrow Gas Tank For Chopper Bobber Derake Customs

September 23, 2019 / admin / Comments Off

Custom Frisco Mount Narrow Gas Tank For Chopper Bobber Derake Customs

The Ultima High Quality Chopper Gas Tank For Your Ride!!!! Hand brazed fuel bung & gas cap bung. Holds 2.5 gallons. Gas cap & petcock have been placed for optimum fuel availability (you get every last drop). Comes with tunnel style mounts that you can weld on (see pic) or you can make your own tabs for your frame & utilize the 5/16-18 threaded bungs. This tank comes pressure tested but we always recommend you have tested before paint. Always test fit before paint. We always strive to give the best description & provide you with the best customer service. Be sure to add me to your FAVORITES list. We will be adding more parts daily. Our inventory is always growing, so if you don’t see it listed here, give us a call. Serious injury, death, and property damage can result from the improper use, control, alteration, or maintenance of motorcycles. The dealer and dealers customers must exercise good judgment in the use, control, alteration, part selection and installation, and maintenance, of motorcycles. Rivercity Cycle Parts has no control over the judgment of others and assumes no responsibility or liability of any nature for the failure of others to use good judgment. The item “Custom Frisco Mount Narrow Gas Tank For Chopper Bobber Derake Customs” is in sale since Tuesday, July 2, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “rivercity-cycle-parts” and is located in Saint Louis, Missouri. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

Country/Region of Manufacture: Taiwan
Material: Steel
Fit: Universal Fit
Capacity: 2.5gal.
Paint: Unfinished
Surface Finish: Raw
Manufacturer Part Number: RCPFTANK
Placement on Vehicle: Front
Brand: Rivercity

Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph

March 29, 2019 / admin / Comments Off

Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph

P-Nut Frisco Shallow Tunnel Gas Tank 2 gallon. Nothing changes the look of your hand-built custom motorcycle like a new bobber gas tank. The Lowbrow P-Nut Gas Tank is a tidy, 2-gallon chopper gas tank based on the old Wassell peanut gas tanks available for custom bikes in the 1950’s – 70’s. In addition, the heavy gauge (1mm, approximately 19 gauge) steel used on the P-Nut Tank is much thicker, and the fabrication much higher quality, than the originals. The Frisco P-Nut Tank has a shallow tunnel, raising your gas tank higher up as it sits on the backbone of your frame. Frisco mount, shallow tunnel so the gas tank sits up high – Two 1/4 inch NPT petcock bungs – Filler accepts a Harley-Davidson style thread-in gas cap (not included). The P-Nut Tank is intended for use on custom motorcycles, be it a bobber, chopper, cafe racer, vintage motorcycle or fresh off the showroom floor. This gas tank features two 1/4 NPT petcock bungs and undrilled mounting tabs for custom installation, and will accept a Harley-Davidson style thread-in gas cap (not included). Most people drill holes in the backbone of their frame, weld some blind threaded tophat bungs in place, and bolt the tank down using some leather washers to cushion between the gas tank tabs and the frame. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph” is in sale since Thursday, May 12, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.

Brand: LowBrow Customs
Fit: Universal Chopper Fit
Manufacturer Part Number: 005629
Material: Steel

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

March 29, 2019 / admin / Comments Off

P-Nut Mid-Tunnel Gas Tank 1.8 gallon. Nothing changes the look of your hand-built custom motorcycle like a new bobber gas tank. The Lowbrow P-Nut Gas Tank is a tidy, 1.8-gallon chopper gas tank based on the old Wassell peanut gas tanks available for custom bikes in the 1950’s – 70’s. In addition, the heavy gauge (1mm, approximately 19 gauge) steel used on the P-Nut Tank is much thicker, and the fabrication much higher quality, than the originals. The Mid-Tunnel P-Nut Tank has a tunnel that runs about midway through the gas tank, bringing your gas tank higher off the backbone than the Original (deep tunnel) version. Mid-Tunnel, tunnel runs midway through the gas tank – Two 1/4 inch NPT petcock bungs – Filler accepts a Harley-Davidson style thread-in gas cap (not included). The P-Nut Tank is intended for use on custom motorcycles, be it a bobber, chopper, cafe racer, vintage motorcycle or fresh off the showroom floor. This gas tank features two 1/4 NPT petcock bungs and undrilled mounting tabs for custom installation, and will accept a Harley-Davidson style thread-in gas cap (not included). Most people drill holes in the backbone of their frame, weld some blind threaded tophat bungs in place, and bolt the tank down using some leather washers to cushion between the gas tank tabs and the frame. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph” is in sale since Thursday, May 12, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.

Brand: LowBrow Customs
Fit: Universal Chopper Fit
Manufacturer Part Number: 005628
Material: Steel

Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper

March 23, 2019 / admin / Comments Off

Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper

Original P-Nut Deep Tunnel Gas Tank 1.8 gallon. Nothing changes the look of your hand-built custom motorcycle like a new bobber gas tank. The Lowbrow P-Nut Gas Tank is a tidy, 1.8-gallon chopper gas tank based on the old Wassell peanut gas tanks available for custom bikes in the 1950’s – 70’s. In addition, the heavy gauge (1mm, approximately 19 gauge) steel used on the P-Nut Tank is much thicker, and the fabrication much higher quality, than the originals. The Original P-Nut Tank has a deep tunnel, it sits low down on the backbone of your frame. Deep tunnel, sits low down on the backbone of your frame – Two 1/4 inch NPT petcock bungs for delivering fuel to your carburetors – Filler accepts a Triumph / British gas cap (not included). The P-Nut Tank is intended for use on custom motorcycles, be it a bobber, chopper, cafe racer, vintage motorcycle or fresh off the showroom floor. This gas tank features two 1/4 NPT petcock bungs and undrilled mounting tabs for custom installation, and will accept a Triumph or British-style gas cap (not included). Most people drill holes in the backbone of their frame, weld some blind threaded tophat bungs in place, and bolt the tank down using some leather washers to cushion between the gas tank tabs and the frame. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper” is in sale since Tuesday, June 27, 2017. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.

Fit: Universal Chopper Fit
Brand: Lowbrow Customs
Manufacturer Part Number: 001626
Capacity: 1.8gal.
Material: Steel
Paint: Unfinished
Surface Finish: Raw
Placement on Vehicle: Front
Country/Region of Manufacture: Taiwan

Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper

March 1, 2019 / admin / Comments Off

Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper

Cole Foster Harley-Davidson Sportster Gas Tank 2007 & Up – 3.25 gallon. Known for his minimalist approach to design and style, Cole Foster designed this low-slung gas tank to add some class to your custom Sportster. It comes complete with a knurled aluminum, 1-5/16-12 tpi (threads per inch) vented gas cap, and uses your stock fuel pump and gas tank mounting hardware. This gas tank swap is an easy install for novice or experienced motorcycle builder alike. With a capacity of approximately 3.25 gallons you won’t be making gas stops every 60 miles either! This tank comes with a 1-5/16-12 thread filler cap. You can easily change up the style and look of your bike with a different filler cap. Please note that there are both vented and unvented caps, the Cole Foster Sportster Gas Tank needs a vented cap to work properly. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper” is in sale since Friday, August 12, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.

Brand: LowBrow Customs
Fit: Custom Fit
Manufacturer Part Number: 005591
Capacity: 3.2gal.
Material: Steel
Paint: Unfinished
Bundled Items: Fuel Cap
Placement on Vehicle: Front
Country/Region of Manufacture: Taiwan

Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber

February 28, 2019 / admin / Comments Off

Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber

WX Split Gas Tanks – Bolt-On for 1936 – 1984 Big Twin Harley-Davidsons – 2.25 gallon. Get a custom, narrowed look with a tight gap between the tanks and no fabrication required. These are the perfect tanks for a custom Shovelhead or Panhead chopper, bobber or custom motorcycle. In 1946 Harley-Davidson introduced the WR factory racer, a 45 cubic-inch flathead designed to dominate the flat tracks and road courses in America. The narrowed tanks were part of the slim profile and’all-business’ form that follows function when it comes to a fast and nimble motorcycle. WX Gas Tanks have a capacity of 2.25 gallons for both tank sides combined (not 2.25 gallons for each side) and feature both a vent and fuel crossover and accept a stock-style 22mm H-D style petcock and accept standard cam-style Harley-Davidson gas cap. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber” is in sale since Monday, April 4, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.

Brand: LowBrow Customs
Fit: Universal Bobber Fit
Manufacturer Part Number: 004051
Material: Steel
Paint: Unfinished
Warranty: Yes

« Older Entries

Tank Stainless Steel

Tag Archive for customs

Tall Koffin Coffin Gas Tank 3.4 Gallon for Harley Chopper Customs Motorcycle

Tall Koffin Coffin Gas Tank 3.4 Gallon for Harley Chopper Customs Motorcycle

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

Tall Koffin Coffin Gas Tank 3.4 Gallon for Harley Chopper Customs Motorcycle

Custom Frisco Mount Narrow Gas Tank For Chopper Bobber Derake Customs

Lowbrow Customs Frisco P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper

Lowbrow Customs Cole Foster Gas Tank 07-up Harley Sportster EFI bobber chopper

Lowbrow Customs WX Split Gas Tank 36-84 Harley Panhead Shovelhead chopper bobber

Recent Posts

Archives

Categories