bobber | Tank Stainless Steel

Tag Archive for bobber

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph

P-Nut Mid-Tunnel Gas Tank 1.8 gallon. Nothing changes the look of your hand-built custom motorcycle like a new bobber gas tank. The Lowbrow P-Nut Gas Tank is a tidy, 1.8-gallon chopper gas tank based on the old Wassell peanut gas tanks available for custom bikes in the 1950’s – 70’s. In addition, the heavy gauge (1mm, approximately 19 gauge) steel used on the P-Nut Tank is much thicker, and the fabrication much higher quality, than the originals. The Mid-Tunnel P-Nut Tank has a tunnel that runs about midway through the gas tank, bringing your gas tank higher off the backbone than the Original (deep tunnel) version. Mid-Tunnel, tunnel runs midway through the gas tank – Two 1/4 inch NPT petcock bungs – Filler accepts a Harley-Davidson style thread-in gas cap (not included). The P-Nut Tank is intended for use on custom motorcycles, be it a bobber, chopper, cafe racer, vintage motorcycle or fresh off the showroom floor. This gas tank features two 1/4 NPT petcock bungs and undrilled mounting tabs for custom installation, and will accept a Harley-Davidson style thread-in gas cap (not included). Most people drill holes in the backbone of their frame, weld some blind threaded tophat bungs in place, and bolt the tank down using some leather washers to cushion between the gas tank tabs and the frame. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Mid Tunnel P-Nut Gas Tank peanut wassell bobber chopper Triumph” is in sale since Thursday, May 12, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.

Brand: LowBrow Customs
Fit: Universal Chopper Fit
Manufacturer Part Number: 005628
Material: Steel

STRETCH NARROW FRISCO GAS FUEL PETRO TANK BOBBER CHOPPER HARLEY DAVIDSON 2.5 gal

March 28, 2019 / admin / Comments Off

STRETCH NARROW FRISCO GAS FUEL PETRO TANK BOBBER CHOPPER HARLEY DAVIDSON 2.5 gal

2003 AND OLDER SPORTSTERS. THIS TANK IS CUSTOM APPLICATION. FITS MANY MAKES AND MODELS (NOT EFI). YOU HAVE TO DRILL HOLES IN TOP OF YOUR FRAME. OR MAYBE USE A CLAMP TO HOLD ON YOUR FRAME. VERY HIGH MOUNTED TANK , ALMOST NO TUNNEL. GALLONS 2.54 CAPACITY. TANK HEIGHT 7 3/4 INCH HIGH. TANK LENGTH 15 INCH LONG. TANK WIDTH 9 1/4 INCH. TUNNEL WIDTH JUST OVER 2 1/2 INCH. OFF CENTER (CAM TYPE) GAS CAP. END OF TAB TO END OF OTHER TAB MEASURES 17 1/2 INCHES. SO HERE IS A NEW CREATION WITH A 2.5 GALLON CAPACITY. THANKS SO MUCH FOR LOOKING , ILL TRY AND POST SOME. The item “STRETCH NARROW FRISCO GAS FUEL PETRO TANK BOBBER CHOPPER HARLEY DAVIDSON 2.5 gal” is in sale since Wednesday, November 1, 2017. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “bobohemian” and is located in Maumee, Ohio. This item can be shipped worldwide.

Brand: Harley Davidson
Capacity: 2.5gal.
Material: Steel
Manufacturer Part Number: sportster chopper bobber bike
Paint: Unfinished
Color: Gray
Placement on Vehicle: Front
Fit: Custom Fit
Surface Finish: Bare Metal

STAINLESS STEEL Custom Round Oil Tank for Harley Chopper Bobber

March 26, 2019 / admin / Comments Off

STAINLESS STEEL Custom Round Oil Tank for Harley Chopper Bobber

Custom round oil tank on the market made with stainless steel! Designed for Har ley. Oil systems ; but will also work with. Dimension: 5 1/4″ by 5 1/8″ (diameter). Distance between mounts: 5. Oil bungs: 1/8 pipe fitting for suction, vent and return. Ca p acity: approx 2.75 quarts. Pure CSS Tabbed Areas. All our items in stock. Please enclose a note stating the item number(s) upon sending the item(s) back. If you feel as though you can not do that, please let us know so that we can resolve any issues. The item “STAINLESS STEEL Custom Round Oil Tank for Harley Chopper Bobber” is in sale since Monday, February 22, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “wholesalestation” and is located in South San Francisco, California. This item can be shipped worldwide.

Brand: Cavalry
Manufacturer Part Number: TANK-ROUND

Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper

March 23, 2019 / admin / Comments Off

Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper

Original P-Nut Deep Tunnel Gas Tank 1.8 gallon. Nothing changes the look of your hand-built custom motorcycle like a new bobber gas tank. The Lowbrow P-Nut Gas Tank is a tidy, 1.8-gallon chopper gas tank based on the old Wassell peanut gas tanks available for custom bikes in the 1950’s – 70’s. In addition, the heavy gauge (1mm, approximately 19 gauge) steel used on the P-Nut Tank is much thicker, and the fabrication much higher quality, than the originals. The Original P-Nut Tank has a deep tunnel, it sits low down on the backbone of your frame. Deep tunnel, sits low down on the backbone of your frame – Two 1/4 inch NPT petcock bungs for delivering fuel to your carburetors – Filler accepts a Triumph / British gas cap (not included). The P-Nut Tank is intended for use on custom motorcycles, be it a bobber, chopper, cafe racer, vintage motorcycle or fresh off the showroom floor. This gas tank features two 1/4 NPT petcock bungs and undrilled mounting tabs for custom installation, and will accept a Triumph or British-style gas cap (not included). Most people drill holes in the backbone of their frame, weld some blind threaded tophat bungs in place, and bolt the tank down using some leather washers to cushion between the gas tank tabs and the frame. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Lowbrow Customs Original P-Nut Gas Tank peanut wassell Triumph bobber chopper” is in sale since Tuesday, June 27, 2017. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.

Fit: Universal Chopper Fit
Brand: Lowbrow Customs
Manufacturer Part Number: 001626
Capacity: 1.8gal.
Material: Steel
Paint: Unfinished
Surface Finish: Raw
Placement on Vehicle: Front
Country/Region of Manufacture: Taiwan

TCMT Stretched 4.7 Gallon Gas Fuel Tank For Harley Custom Chopper Bobber Baggers

March 22, 2019 / admin / Comments Off

TCMT Stretched 4.7 Gallon Gas Fuel Tank For Harley Custom Chopper Bobber Baggers

4.7 Gallon Custom 5 Stretch Gas Fuel Tank For Harley Davidson Chopper Baggers. Condition: Aftermarket 100% Brand New. Superior quality and Durable. Material: Heavy-Duty 16 gauge Steel. Fuel Capacity: 4.7 Gallons. The product is brand new and its surface is made of anti-rust painting to prevent rust better. Although the color of its surface seems uneven, it will be protected better. Harley Custom CHOPPER, BOBBER, ETC. 1x Fuel Gas Tank (Pop-Up Gas cap Included). International Buyers Please Note. All labels with clear words on the package; 2. The real goods you receive; 3. Different angles of the products and package to show the problem clearly. Our warehouses are in Rancho Cucamonga, California, United States. Buyers have to pay for the return cost and we will pay the cost for resend. We are committed to resolve all issues in a friendly and satisfactory manner. If you do not get a response from us, then please check your junk or spam mailbox. The item “TCMT Stretched 4.7 Gallon Gas Fuel Tank For Harley Custom Chopper Bobber Baggers” is in sale since Thursday, May 17, 2018. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “usamotorpartsfactory” and is located in Rancho Cucamonga, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Viet nam.

Brand: TCMT
Warranty: Yes
Manufacturer Part Number: Does not apply
Material: Heavy-Duty Steel
Paint: Unfinished
Capacity: 4.7gal.
Fitment: For Harley Custom Chopper Bobber
Note: Pop-up gas cap Included

Ribbed Axed Low Tunnel Peanut Gas Tank 3.3g Steel Screw-in Harley Bobber Chopper

March 21, 2019 / admin / Comments Off

Ribbed Axed Low Tunnel Peanut Gas Tank 3.3g Steel Screw-in Harley Bobber Chopper

IF YOU WANT THE DICE GREASY KUSTOMS ZERO LOOK YOU HAVE TO START WITH THE RIGHT PARTS DON’T SETTLE FOR’CLOSE ENOUGH. RIBBED 3.3 GALLON LOW-TUNNEL AXED PEANUT BOBBER TANK. A great sized new tank with a cool center rib feature! With screw-in style gas cap bung. The sad fact is that many of the great peanut style bobber tanks allow you to go less than 100 miles between fill-ups – here is the best compromise we have found – a deceptively small look that still holds more than three gallons One of our favorite small tanks – great price and small appearance, but still big enough to RIDE. Tunnel width 2-1/2 – tunnel depth. 3/8″ NPT BUNG ON CENTER RIGHT SIDE TWO 1/4″ NPT BUNGS AT REAR (for petcock or fuel cross-over equalizer tube). Gas cap not included. Comes in raw unfinished steel with rough areas, light scratches and marks from the manufacturing process. Will need surface preparation, sanding, smoothing, etc. Bare steel may require degreasing, surface etch, slight surface prep, and filling prior to painting or chroming. ALWAYS TEST TANKS FOR LEAKS AND SEAL AS NEEDED BEFORE PAINTING! See our other items for more unique bobber and chopper tanks. Add a map to your own listings. The item “RIBBED AXED LOW TUNNEL PEANUT GAS TANK 3.3G STEEL SCREW-IN HARLEY BOBBER CHOPPER” is in sale since Tuesday, February 28, 2017. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “paniccycles” and is located in Richardson, Texas. This item can be shipped worldwide.

Surface Finish: UNFINISHED MILD STEEL
Manufacturer Part Number: Does Not Apply
Material: Steel
Brand: PC
Fit: Universal Bobber Fit
Capacity: 3.3gal.
Paint: Unfinished

Gas Tank Narrow 1.6g Harley Mini Sportster Frisco Chopper Bobber Style Screw In

March 18, 2019 / admin / Comments Off

Gas Tank Narrow 1.6g Harley Mini Sportster Frisco Chopper Bobber Style Screw In

IF YOU WANT THE DICE GREASY KUSTOMS ZERO LOOK YOU HAVE TO START WITH THE RIGHT PARTS DON’T SETTLE FOR’CLOSE ENOUGH. Sweet 1.6 Gallon Steel NARROW Mini Sportster Style Gas Tank. This tank is the perfect size – not too big! A one-off look for a fraction of the cost. Great looking low tunnel Frisco & Swedish style (sits high on frame) perfect for any old school bobber or chopper. Why waste time lowering and re-welding old tank tunnels? Mini gas tank has a fuel capacity of 1.6 gallons and features a raw steel finish. U ses standard Harley 1984 & newer late style “screw in” gas cap – gas cap bung is offset to the right side. Tank also includes an external 1/4 NPT bung on the rear left side. 1.6 Gallon Tank approximate dimensions. Tank top length 17″, Bottom length 18″(including tabs), Front width 7-1/2″, Rear width 3″. Tunnel 1″ high x 2-1/8″ wide, Tunnel. 14-3/4″, Slotted mount holes are 16-1/2″ center to center. 6 High at front of tank, approx. 1/2 high at rear. Nice heavy weight steel approx. Fully tabbed for mounting as shown in pics – no additional mount included – cap or petcock NOT included. ALWAYS TEST TANKS FOR LEAKS AND SEAL AS NEEDED BEFORE PAINTING! Bare steel may require degreasing, surface etch, slight surface prep, and filling prior to painting or chroming. See our other items for more unique chopper tanks. The item “GAS TANK NARROW 1.6G HARLEY MINI SPORTSTER FRISCO CHOPPER BOBBER STYLE SCREW IN” is in sale since Monday, November 12, 2018. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “paniccycles” and is located in Richardson, Texas. This item can be shipped worldwide.

Brand: PC
Fit: Custom Fit
Manufacturer Part Number: Does Not Apply
Capacity: 1.6gal.
Material: Unfinished Raw Steel
Paint: Unfinished
Surface Finish: UNFINISHED MILD STEEL

STAINLESS STEEL Custom Oval Oil Tank for Harley Chopper Bobber

March 16, 2019 / admin / Comments Off

STAINLESS STEEL Custom Oval Oil Tank for Harley Chopper Bobber

Oil tank on the market made with stainless steel! Designed for Har ley. Oil systems ; but will also work with. 13.75″ x 7.5″ x 4.75. Distance between mounts: 5. Oil bungs: 1/8 pipe fitting for suction, vent and return. Ca p acity: approx 3.25 quarts. Pure CSS Tabbed Areas. All our items in stock. Please enclose a note stating the item number(s) upon sending the item(s) back. If you feel as though you can not do that, please let us know so that we can resolve any issues. The item “STAINLESS STEEL Custom Oval Oil Tank for Harley Chopper Bobber” is in sale since Monday, February 22, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “wholesalestation” and is located in South San Francisco, California. This item can be shipped worldwide.

Brand: Cavalry
Manufacturer Part Number: TANK-OVAL

Narrow Axed Gas Tank 1.9 gal bobber chopper Sportster Harley xs650 Triumph slim

March 13, 2019 / admin / Comments Off

Narrow Axed Gas Tank 1.9 gal bobber chopper Sportster Harley xs650 Triumph slim

Narrow Axed Chopper Motorcycle Gas Tank 1.9 gallon. This narrowed version of the classic Axed chopper gas tank holds 1.9 gallons of gas. Narrower (as the name implies) than the standard Axed gas tank, it sits up pretty high on your frame’s backbone. Axed tanks came about in the 1970’s, styled after custom gas tanks some motorcycle enthusiasts made for their Harley-Davidson choppers by cutting up stock H-D split gas tanks and welding the halves together, end up with a similar shape to the Axed Tank. Axed tanks are sometimes called an Alien Gas Tank because they resemble an alien head, especially the dual-cap version (the caps are the eyes)! It accepts any cam-style Harley-Davidson gas cap and accepts a 1/4 NPT petcock. The tunnel, at deepest, is 3.5 deep. The mounting tabs are undrilled, allowing you to drill and mount your tank exactly how you want it. These are a very nice quality tank, perfect for your home built chopper project. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Narrow Axed Gas Tank 1.9 gal bobber chopper Sportster Harley xs650 Triumph slim” is in sale since Friday, September 23, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.

Brand: Cycle Standard
Manufacturer Part Number: 004557
Material: Steel
Warranty: Yes

Narrow Peanut Mid-Tunnel Gas Tank 1.8 gal p-nut bobber chopper wassell triumph

March 12, 2019 / admin / Comments Off

Narrow Peanut Mid-Tunnel Gas Tank 1.8 gal p-nut bobber chopper wassell triumph

Narrow Wassell Peanut Shallow-Tunnel Gas Tank 1.8 gallon. This Narrow Wassell Peanut Frisco Gas Tank features heavy gauge steel construction, a single 1/4 NPT petcock bung, and undrilled DIY mounting tabs for custom installation. It holds approximately 1.8 gallons of Go juice (that’s gasoline, big fella), and accepts any cam-style Harley-Davidson gas cap for unparalleled chopper authenticity. The Frisco Peanut Tank has a shallow tunnel, raising your gas tank higher up as it sits on the backbone of your frame. This design with the offset petcock bung on the very back of the tank allows you to use all the gas you can fit in there! Frisco refers to a style of motorcycle that originated in the Bay Area of San Francisco. Typically these’Frisco Style’ bikes would have all extraneous parts removed, stripped down to the bare assentials, narrow and nimble. Often the gas tanks would be lifted in the front so that sat up higher, allowing for maximum amount of gasoline usage in the tank. Thus the term Frisco mount, which generally means a very shallow tunnel so the gas tank sits up high on the frame’s backbone. Note: It is highly recommended to fit your gas tank to your bike before painting. Check for clearance or mounting issues as different combinations of triple trees, risers, and handlebars may cause clearance issues when turning. Lowbrow was started in 2004, a physical manifestation of chopper fever and passion for all things motorcycle. We are the #1 source for custom and chopper parts for your moto, backed by a tight-knit crew here in northeast Ohio who strive to make your experience with us the best possible. We not only work hard to supply motorcycle enthusiasts with cool parts from small shops all around the world, but to also keep innovating and building, creating brand new parts and accessories, getting them out onto the road. In Stock & Ships Fast! Free Expert Tech Support. We eat, sleep, live & love motorcycles! The item “Narrow Peanut Mid-Tunnel Gas Tank 1.8 gal p-nut bobber chopper wassell triumph” is in sale since Friday, September 23, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “lowbrowcustoms” and is located in Brunswick, Ohio. This item can be shipped worldwide.

Brand: Cycle Standard
Manufacturer Part Number: 004555
Material: Steel
Warranty: Yes

« Older Entries Recent Entries »

Tank Stainless Steel