direct | Tank Stainless Steel

Tag Archive for direct

Gledhill Stainless Lite Plus Unvented Direct Cylinder 210 Litres PLUDR210 TANK45

Gledhill Stainless Lite Plus Unvented Direct Cylinder 210 Litres PLUDR210 TANK45

Gledhill Duplex stainless steel unvented cylinder providing mains pressure hot water. The direct model comes complete with two immersions providing the functionality to heat the store of water by utilising off-peak electricity tariffs. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel. Post weld treatment for longevity. Compression fittings as standard. Lift up pressure and temperature relief valve. Flexi hose and expansion vessel bracket. 90 degree elbow on hot water draw off. 50 mm HCFC free insulation. Up to 50 percentage lighter than other manufacturers. 100 percentage recyclable duplex stainless steel. Cold or Hot Water.

2 direct hot water cylinder £450 each new 263 Litre Stainless steel from BES

September 2, 2023 / admin / Comments Off

2 direct hot water cylinder £450 each new 263 Litre Stainless steel from BES

If you just want one then message me.

Gledhill ES 120L Direct Unvented Hot Water Cylinder Stainless Steel 25 Year

August 5, 2023 / admin / Comments Off

Gledhill ES 120L Direct Unvented Hot Water Cylinder Stainless Steel 25 Year

Gledhill ES 120L Direct Unvented Cylinder Stainless Steel. The Stainless ES is an unvented cylinder available in direct and indirect configurations. Value engineered, the Stainless ES offers a competitively priced cylinder which benefits from Gledhill’s proven technology and quality manufacturing. The unvented cylinder is manufactured from highly corrosion-resistant duplex stainless steel and is supplied with full NSF WRC and WRAS independent approvals. Delivers mains pressure hot water, enabling high flow rates for showers and baths, without the need for a boost pump. Gledhill ES 120L Direct Unvented Cylinder Stainless Steel Features. Gledhill unvemted cylinder installation guide. Gledhill unvemted cylinder brouchure. Maximum inlet pressure 12 Bar. Pressure reducing valve 3 Bar. Max working pressure 6 Bar. 40mm insulation to reduce heat loss. Manufactured from highly corrosion-resistant duplex stainless steel. What Do You Get In The Box? 2 x 3KW immersion heater. Temperature and pressure relief valve. 3 Bar inlet countrol. Gledhill Stainless ES is covered by Section G3 of the Building Regulations (England and Wales). Technical Standard P3 (Scotland) and Building Regulation P5 (Northern Ireland). Compliance can be achieved via a Competent Person Self Certification Scheme or notificaton of installation to the Local Authority Building Control Department.

Ss Water Tank Ro Direct Sale Yummy Vlogs

June 5, 2023 / admin / Comments Off

Gledhill ES 90L DIRECT Unvented Hot Water Cylinder Stainless Steel 90 Litre

June 9, 2022 / admin / Comments Off

Gledhill ES 90L DIRECT Unvented Hot Water Cylinder Stainless Steel 90 Litre

Gledhill ES 90L Direct Unvented Cylinder Stainless Steel. The Stainless ES is an unvented cylinder available in direct and indirect configurations. Value engineered, the Gledhill ES 90L Direct Unvented Cylinder offers a competitively priced cylinder which benefits from Gledhill’s proven technology and quality manufacturing. The unvented cylinder is manufactured from highly corrosion-resistant duplex stainless steel and is supplied with full NSF WRC and WRAS independent approvals. Delivers mains pressure hot water, enabling high flow rates for showers and baths, without the need for a boost pump. Gledhill ES 90L Direct Unvented Cylinder Stainless Steel Features. Gledhill unvented cylinder installation guide. Gledhill unvented cylinder brouchure. Maximum inlet pressure 12 Bar. Pressure reducing valve 3 Bar. Max working pressure 6 Bar. 40mm insulation to reduce heat loss. Manufactured from highly corrosion-resistant duplex stainless steel. What Do You Get In The Box? 1 x 3KW immersion heater. Temperature and pressure relief valve. 3 Bar inlet countrol. Gledhill Stainless ES is covered by Section G3 of the Building Regulations (England and Wales). Technical Standard P3 (Scotland) and Building Regulation P5 (Northern Ireland). Compliance can be achieved via a Competent Person Self Certification Scheme or notificaton of installation to the Local Authority Building Control Department. This item is in the category “Home, Furniture & DIY\Heating, Cooling & Air\Heaters & Radiators\Water Heaters\Standard Water Heaters”. The seller is “s-n-h” and is located in this country: GB. This item can be shipped to United Kingdom.

Colour: Silver
Modified Item: No
Country/Region of Manufacture: United Kingdom
Water Connection Location: Side, Top
Custom Bundle: No
Unit Quantity: 1
Tank Capacity: 90
MPN: SESINPDR090
Mounting Location: Floor
Room: Any Room
Brand: Gledhill
Application: Camper/Caravan/Motorhome, Marine, Whole House
Tank Warranty Lifetime: 25 Years
Heating System: Storage Tank
Voltage: 240 V
Tank Lining Material: Stainless Steel
EAN: DoesNotApply

Gledhill ES 150L DIRECT Unvented Hot Water Cylinder Stainless Steel 150 Litre

May 3, 2022 / admin / Comments Off

Gledhill ES 150L DIRECT Unvented Hot Water Cylinder Stainless Steel 150 Litre

Gledhill ES 150L Direct Unvented Cylinder Stainless Steel. The Stainless ES is an unvented cylinder available in direct and indirect configurations. Value engineered, the Gledhill ES 150L Direct Unvented Cylinder offers a competitively priced cylinder which benefits from Gledhill’s proven technology and quality manufacturing. The unvented cylinder is manufactured from highly corrosion-resistant duplex stainless steel and is supplied with full NSF WRC and WRAS independent approvals. Delivers mains pressure hot water, enabling high flow rates for showers and baths, without the need for a boost pump. Gledhill ES 150L Direct Unvented Cylinder Stainless Steel Features. Gledhill unvented cylinder installation guide. Gledhill unvented cylinder brouchure. Maximum inlet pressure 12 Bar. Pressure reducing valve 3 Bar. Max working pressure 6 Bar. 40mm insulation to reduce heat loss. Manufactured from highly corrosion-resistant duplex stainless steel. What Do You Get In The Box? 2 x 3KW immersion heater. Temperature and pressure relief valve. 3 Bar inlet countrol. Gledhill Stainless ES is covered by Section G3 of the Building Regulations (England and Wales). Technical Standard P3 (Scotland) and Building Regulation P5 (Northern Ireland). Compliance can be achieved via a Competent Person Self Certification Scheme or notificaton of installation to the Local Authority Building Control Department. This item is in the category “Home, Furniture & DIY\Heating, Cooling & Air\Heaters & Radiators\Water Heaters\Standard Water Heaters”. The seller is “s-n-h” and is located in this country: GB. This item can be shipped to United Kingdom.

Model: SESINPDR150
Colour: Silver
Country/Region of Manufacture: United Kingdom
Water Connection Location: Side, Top
Range: Direct Cylinders
Custom Bundle: No
Manufacturer: Gledhill
Warranty: 25 Year Warranty
Application: Camper/Caravan/Motorhome
Item Height: 1012mm
Tank Warranty Lifetime: 25 Years
Unit Quantity: 1
Tank Capacity: 149l
Type: Storage Tank Water Heater
Features: Adjustable Thermostat, Corrosion Resistant
MPN: SESINPDR150
Mounting Location: Floor
Brand: Gledhill
Modified Item: No
Category: Water Heaters & Boilers
SKU: SESINPDR150
EC Range: A – G
Shipping: Free Shipping
Heating System: Storage Tank
Tank Lining Material: Stainless Steel
Voltage: 240 V
EAN: DoesNotApply

Gledhill ES 200L DIRECT Unvented Hot Water Cylinder Stainless Steel SESINPDR200

May 1, 2022 / admin / Comments Off

Gledhill ES 200L DIRECT Unvented Hot Water Cylinder Stainless Steel SESINPDR200

Gledhill ES 200L Direct Unvented Cylinder Stainless Steel. The Stainless ES is an unvented cylinder available in direct and indirect configurations. Value engineered, the Gledhill ES 200L Direct Unvented Cylinder offers a competitively priced cylinder which benefits from Gledhill’s proven technology and quality manufacturing. The unvented cylinder is manufactured from highly corrosion-resistant duplex stainless steel and is supplied with full NSF WRC and WRAS independent approvals. Delivers mains pressure hot water, enabling high flow rates for showers and baths, without the need for a boost pump. Gledhill ES 200L Direct Unvented Cylinder Stainless Steel Features. Gledhill unvented cylinder installation guide. Gledhill unvented cylinder brouchure. Maximum inlet pressure 12 Bar. Pressure reducing valve 3 Bar. Max working pressure 6 Bar. 40mm insulation to reduce heat loss. Manufactured from highly corrosion-resistant duplex stainless steel. What Do You Get In The Box? 2 x 3KW immersion heater. Temperature and pressure relief valve. 3 Bar inlet countrol. Gledhill Stainless ES is covered by Section G3 of the Building Regulations (England and Wales). Technical Standard P3 (Scotland) and Building Regulation P5 (Northern Ireland). Compliance can be achieved via a Competent Person Self Certification Scheme or notificaton of installation to the Local Authority Building Control Department. This item is in the category “Home, Furniture & DIY\Heating, Cooling & Air\Heaters & Radiators\Water Heaters\Standard Water Heaters”. The seller is “s-n-h” and is located in this country: GB. This item can be shipped to United Kingdom.

Model: SESINPDR200
Colour: Silver
Country/Region of Manufacture: United Kingdom
Water Connection Location: Side, Top
Custom Bundle: No
Item Height: 1305mm
Unit Quantity: 1
Tank Capacity: 198l
Type: Storage Tank Water Heater
Features: Adjustable Thermostat, Corrosion Resistant
MPN: SESINPDR200
Mounting Location: Floor, Indoor, Whole House
Brand: Gledhill
Modified Item: No
Room: Any Room
Application: Camper/Caravan/Motorhome
EC Range: A – G
Tank Warranty Lifetime: 25 Years
Heating System: Storage Tank
Tank Lining Material: Stainless Steel
Voltage: 240 V
EAN: DoesNotApply

Gledhill ES 150L Direct Unvented Hot Water Cylinder Stainless Steel

April 3, 2022 / admin / Comments Off

Gledhill ES 150L Direct Unvented Hot Water Cylinder Stainless Steel

Gledhill ES 150L Direct Unvented Cylinder Stainless Steel. The Stainless ES is an unvented cylinder available in direct and indirect configurations. Value engineered, the Gledhill ES 150L Direct Unvented Cylinder offers a competitively priced cylinder which benefits from Gledhill’s proven technology and quality manufacturing. The unvented cylinder is manufactured from highly corrosion-resistant duplex stainless steel and is supplied with full NSF WRC and WRAS independent approvals. Delivers mains pressure hot water, enabling high flow rates for showers and baths, without the need for a boost pump. Gledhill ES 150L Direct Unvented Cylinder Stainless Steel Features. Gledhill unvented cylinder installation guide. Gledhill unvented cylinder brouchure. Maximum inlet pressure 12 Bar. Pressure reducing valve 3 Bar. Max working pressure 6 Bar. 40mm insulation to reduce heat loss. Manufactured from highly corrosion-resistant duplex stainless steel. What Do You Get In The Box? 2 x 3KW immersion heater. Temperature and pressure relief valve. 3 Bar inlet countrol. Gledhill Stainless ES is covered by Section G3 of the Building Regulations (England and Wales). Technical Standard P3 (Scotland) and Building Regulation P5 (Northern Ireland). Compliance can be achieved via a Competent Person Self Certification Scheme or notificaton of installation to the Local Authority Building Control Department. This item is in the category “Home, Furniture & DIY\Heating, Cooling & Air\Heaters & Radiators\Water Heaters\Standard Water Heaters”. The seller is “reeds” and is located in this country: GB. This item can be shipped to United Kingdom.