Tag Archive for mounts

Ultima 200 Series Rigid Frame with Tank Mounts, 34° Rake, 4 Stretch Downtubes

Ultima_200_Series_Rigid_Frame_with_Tank_Mounts_34_Rake_4_Stretch_Downtubes_01_cx Ultima 200 Series Rigid Frame with Tank Mounts, 34° Rake, 4 Stretch Downtubes

Ultima 200 Series Rigid Frame with Tank Mounts, 34° Rake, 4 Stretch Downtubes
Ultima 200 Series Rigid Frame w/ Tank Mounts, 34° Rake, 4 Stretch Downtubes. 200 rear tire with 34deg rake and 4″ stretch in downtubes, w/ 1.5″ stretch backbone. 1020 DOM (drawn over mandrel) Steel Tubing. Downtube legs are 1-1/4 O. Backbone and seat post are 1-1/2 O. Seat post is 1-1/2 O. Accepts 1984 & Later flat side gas tanks. Accepts Softail style oil tank, Softail style rear brake 1987-Later. Fits up to 200 series tire with rear belt. Included additionally: 3/4 Diameter rear axle and Front oil tank mounts. Includes Fat Bob style gas tank mounts. If you need something that you dont see listed just ask. This applies only to orders in the continental U. Serious injury, death, and property damage can result from the improper use, control, alteration, or maintenance of motorcycles. The dealer and dealers customers must exercise good judgment in the use, control, alteration, part selection and installation, and maintenance, of motorcycles. Jireh has no control over the judgment of others and assumes no responsibility or liability of any nature for the failure of others to use good judgment. The item “Ultima 200 Series Rigid Frame with Tank Mounts, 34° Rake, 4 Stretch Downtubes” is in sale since Thursday, October 21, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Frames”. The seller is “jirehcycles” and is located in Festus, Missouri. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Down-Tube Stretch: 4in.
  • Material: Steel
  • Tube Diameter: 1-1/4in.
  • Fit: Custom Fit
  • Type: Frame Chassis
  • Frame Style: Rigid
  • Surface Finish: Bare
  • Manufacturer Part Number: 85-183
  • Rake Angle: 34 Degrees
  • Compatible Rear Tire Width: 180/200mm
  • Brand: Ultima
  • Backbone Stretch: 1.5in.
  • Warranty: Yes

Ultima 200 Series Rigid Frame with Tank Mounts, 34° Rake, 4 Stretch Downtubes

OLD SCHOOL LEGACY 3.8G INDENTED SIDE GAS TANK With WELD-ON MOUNTS BOBBER CHOPPER

OLD_SCHOOL_LEGACY_3_8G_INDENTED_SIDE_GAS_TANK_With_WELD_ON_MOUNTS_BOBBER_CHOPPER_01_yjam OLD SCHOOL LEGACY 3.8G INDENTED SIDE GAS TANK With WELD-ON MOUNTS BOBBER CHOPPER
OLD SCHOOL LEGACY 3.8G INDENTED SIDE GAS TANK With WELD-ON MOUNTS BOBBER CHOPPER
OLD SCHOOL LEGACY 3.8G INDENTED SIDE GAS TANK With WELD-ON MOUNTS BOBBER CHOPPER

OLD SCHOOL LEGACY 3.8G INDENTED SIDE GAS TANK With WELD-ON MOUNTS BOBBER CHOPPER
GUARANTEED COOL FOR YOUR CHOPPER, BOBBER OR CRUISER. LEGACY 3.8 GALLON GAS TANK WITH OLD SCHOOL INDENTED SIDES. Legacy style 3.8 gallon gas tank with stock screw bung gives functional styling and improves rider comfort. Comes with no mounting brackets fitted, includes 3 piece weld-on steel mounting bracket kit with bushings for your custom build. Includes 22MM (13/16 Hex) Mid petcock bungs on L&R (includes cap for petcock bung side not needed). GAS CAP NOT INCLUDED. (TAKES THE STANDARD HARLEY 1982 & NEWER SCREW-IN CAP). TANK HEIGHT: 8 AT FRONT. TANK WIDTH: 11″ AT FRONT, 5″ AT REAR. L WIDTH: 2″ AT FRONT, 1-3/4″ AT REAR, 3 IN MIDDLE PORTION. TUNNEL DEPTH AT FRONT: 5. ALWAYS TEST TANKS FOR LEAKS AND SEAL AS NEEDED BEFORE PAINTING! Bare steel may require degreasing, surface etch, slight surface prep, and filling prior to painting or chroming. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition and seal to help stop leaks and prevent corrosion. Check petcock opening, making sure the petcock can be easily installed. Petcock fitting should be masked or plugged during painting for easy installation of petcock. Add a map to your own listings. The item “OLD SCHOOL LEGACY 3.8G INDENTED SIDE GAS TANK With WELD-ON MOUNTS BOBBER CHOPPER” is in sale since Tuesday, November 14, 2017. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Gas Tanks”. The seller is “paniccycles” and is located in Richardson, Texas. This item can be shipped worldwide.
  • Brand: PC
  • Fit: Universal Fit
  • Manufacturer Part Number: Does Not Apply
  • Capacity: 3.8gal.
  • Material: Steel
  • Paint: Unfinished
  • Color: GAS CAP NOT INCLUDED
  • Surface Finish: RAW UNFINISHED STEEL
  • Bundled Items: Bolt Kit

OLD SCHOOL LEGACY 3.8G INDENTED SIDE GAS TANK With WELD-ON MOUNTS BOBBER CHOPPER